RTP( Ready-to-paint): A clearcoat is not needed for UV protection but recommended to protect against scratches and wear. Some customers leave the frame bare.
BB standard: BB386EVO pressfit 86.5x46mm BB shell
Recommended groupsets: For serious gravel and off-road (on any brand of bike), we recommend a rear derailleur with a clutch or cage damper (Shimano GRX (1x & 2x), SRAM Force AXS & Red AXS (1x & 2x), SRAM Apex1, Rival1, Force1, Campagnolo Ekar)
Shimano crank fit: All road cranks
SRAM crank fit: All DUB road, Force 1 BB30
Front derailleur mount: Bolt-on, removable
Recommended ring shape: Flat (for example Wolftooth)
Maximum 1x ring size: General guidance: 50t (flat ring, not available in all sizes with all BCDs so check with your crank supplier), 46t (SRAM offset ring). Note: clearance depends on chainline & chainring. 2mm space is required so please verify.
Maximum 2x ring size: Clearance depends on crank & chainring model. 2mm space is required. For most current generation cranks, the following applies:50t (outer ring), 36t (inner ring)
Front thru-axle: 100x12mm superlight Carbon-Ti X-12
Front disc rotor size 160mm only
Front brake caliper mount: Smartmount 160 system attaches flatmount caliper, without adaptor, for 160mm rotors
Front brake bolts SRAM: 37mm “REAR” brake bolts for 30mm “chainstay” (SRAM part# 00.5318.005.008)
Front brake bolts Shimano: 43.2mm “REAR” brake bolts for 30mm “chainstay” (Shimano part# Y8N208030)
Front brake set-up Campagnolo “140mm” (rear) caliper + 160mm rotor, no adaptors, 2x 39mm "screws for 30-34 mm rear mount thickness” (Campagnolo part# AC18-DBSC39)
Rear disc rotor size: 140mm or 160mm
Rear brake 140mm mount: Direct mount
Rear brake 160mm mount: Use adaptor for SRAM (00.5318.018.001) or Shimano (ISMMAR160DDA)
